
FIBREFIX | Fibreglass Filler
Have a hole in your bodywork that is rusting away? Look no further than ProWorx® Fibrefix Fibreglass Body Filler for the ultimate in all repair applications.
Fibrefix Fibreglass Body Filler is a premium glass-strand filled body filler with excellent build and repair properties for bridging holes and rust damage.
This innovative and highly diverse repair product is developed from processed short strands of fibreglass and is an extremely simple and easily workable product to shape and apply, making it the ideal solution to both large and small repair zones.
The product is a high-quality two-part polyester body filler, designed specifically for dealing with deep filling and scenarios which require the bridging of holes. Fibrefix has excellent adhesive qualities making it universally applicable across a range of common body work repairs.
Once cured, which takes place quickly due to its fast cure properties, Fibrefix Fibreglass Body Filler sands down with great ease, ensuring a well-developed repair surface for final skimming with products such as ProWorx Swift or Elite prior to priming and painting.
Users can repair broken, cracked and rusted car panels and body components in a quick and easy manner. The polyester fibreglass resin creates a permanent and waterproof seal over all repair zones.
Fibrefix Fibreglass Body Filler is available in kit sizes of 0.25L, 0.6L, 1L and 1.85L
Fibrefix Fibreglass Body Filler is compatible with the latest curing processes:
- (Air Dry): Typical gel time for this fibreglass body filler is approximately 8-10 minutes at 20°C and is fully cured and ready for sanding after approximately 30 minutes at 20°C.
- (Infra-Red Drying): Typically, 16 to 20 minutes at an appropriate distance.
- (Symach Flydry system): Typically, 5 minutes with correct body filler application
Fibrefix Fibreglass Body Filler is suitable for substrates including:
- Mild Steel
- GRP (Glass reinforced plastic)
- SMC (Sheet moulding compounds)
Avoid mixing this fibreglass body filler product on contaminated, dirty or absorbent surfaces. For optimum results, use proper mixing boards. Also, avoid excessive application, recommended thickness per coat applied is 2/3mm.
Follow the links below for more Fibrefix Fibreglass Body Filler information:
Visit our downloads page for any of the following fibreglass filler information.
- Step by step repair guide
- Fibrefix safety data sheet
- Fibrefix technical data sheet
- Contact our sales team
- Download the ProWorx catalogue
Step by Step
2
Remove all the loose/ fractured particles and paint from the affected area with a DA sander using a P80 grit paper.
3
Cut a piece of Aluminium mesh to the approximate size of the repair. Secure the mesh in place ready for the filler application.
4
Once the area has been prepared, mix your Fibrefix filler with hardener with a ratio of 3% at an ambient temp of 20°C.
5
Then apply your full coat of Fibrekit Fibreglass filler with the applicator provided making sure that firm and even pressure is applied.
7
Once area is prepared mix your ProWorx filler with a hardener at a ratio of 2% at an ambient temp of 20°C and apply a top coat over the initial Fibrefix body filler repair.
8
Apply this coat of ProWorx Bulk Filler with the applicator provided making sure that firm and even pressure is applied.
How to carry out a panel repair using ProWorx Car Body Fillers
ProWorx produces an extensive range of automotive crash repair products which are designed for the professional industry. These unique, highly researched and carefully engineered formulas allow for ease of application, shaping and workability. This combination of unique capabilities allows for a standard of repair which is at the leading edge of the market. These results are achieved equally within professional environments and for home application. The universal ease of use of this range makes ProWorx the first choice when it comes to automotive damage repair.
Get it touch with us today!
Contact us today for more information regarding our product range.